-16-
Accessories
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
t
ool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
NOTE: The smaller the gauge number, the
heav i er the cord.
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
!
WARNING
T
ool’s
Ampere
R
ating
Cord Size in A.W.G.
Wire Sizes in mm
2
3
-6
6-8
8-10
1
0-12
12-16
1
8 16 16 14 0.75 0.75 1.5 2.5
18 16 14 12 0.75 1.0 2.5 4.0
18 16 14 12 0.75 1.0 2.5 4.0
1
6 16 14 12 1.0 2.5 4.0 —
14 12 —— ————
25 50 100 150 15 30 60 120
Cord Length in Feet Cord Length in Meters
1/4" Collet Chuck *
Shaft Wrench *
1/2" Adapter Sleeve **
Straight and Circular Edge Guide **
Dust Port Adapter**
Template Guides **
Template Guide Adapter **
(*= standard equipment)
(**= optional accessories)
SM 1619X03874 04-09:SM 1619X03874 04-09 4/20/09 9:45 AM Page 16
To Next Page
Loading...
