Skil 1825 User Manual

IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
1810
1815
1820
1825
For English Version Version française Versión en español
See page 2 Voir page 18 Ver la página 34
1-877-SKIL999 (1-877-754-5999) www.skil.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centres
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
SM 1619X03874 04-09:SM 1619X03874 04-09 4/20/09 9:45 AM Page 1

Skil 1825 Specifications

General

Brand	Skil
Model	1825
Category	Network Router
Language	English

Summary

General Power Tool Safety Warnings

Work Area and Electrical Safety

Ensuring a safe work environment and proper electrical connections to prevent hazards.

Personal Safety and Tool Operation

Guidelines for operator alertness, PPE, and safe handling during tool use.

Power Tool Use and Care

Additional Safety Warnings

Electrical Safety and Hazard Avoidance

Specific advice on GFCI, dry conditions, and handling electrical tools safely.

Hazardous Dust Exposure and Mitigation

Information on dust hazards from certain materials and protective measures.

Safety Rules for Routers

Workpiece and Tool Handling Safety

Proper techniques for securing workpieces and holding the router safely.

Operational Safety Guidelines

Assembly Procedures

Router Bit Installation and Removal

Collet Chuck Maintenance and Motor Removal

Operating Instructions

Fixed Base Depth Adjustment

Plunge Base Depth Control

Trigger Switch and Lock-On Features

Router Operation: Feeding and Speed

Feed Direction and Rate Control

Guiding the Router

Trouble Shooting Guide

Tool Power and Speed Issues

Diagnosing and resolving problems with tool startup and operational speed.

Routing Performance and Kickback Problems

Troubleshooting binding, stalling, kickback, and cut quality issues.