12
for recycling. Robert Bosch Tool Corporation’s
involvement in this program is part of our
commitment to preserving our environment
and conserving our natural resources.”
Battery Removal Instructions
Run motor until battery is completely
discharged before attempting to remove
battery from your tool.
1. Remove the ten (10) housing screws with a
T8 Torx screwdriver.
2. Remove housing cover by lifting upward
from front end of tool.
3. Disconnect lead wires from battery.
4. Wrap heavy insulating tape around battery
terminals or enclose in a sealable plastic bag
to prevent possible shorting.
5. Dispose of battery through your local waste
removal authority or a Skil Service Center.
To Next Page
