Need help?Do you have a question about the Skil 2354 and is the answer not in the manual?
General| Voltage | 4V |
|---|---|
| Chuck Size | 1/4 inch |
| Chuck Type | Hex |
| Type | Cordless Screwdriver |
| Battery Type | Lithium-Ion |
Ensures a clean and well-lit workspace to prevent accidents.
Guidelines for safe use of power plugs and avoiding electrical hazards.
Emphasizes staying alert, using common sense, and avoiding operation while tired.
Always wear eye protection and other suitable gear for safety.
Ensure the switch is off before connecting power or picking up the tool.
Remove tools before turning the power tool on to avoid injury.
Guidelines on using the tool correctly and maintaining it.
Disconnect power before adjustments, accessory changes, or storage.
Use only the manufacturer-specified charger to prevent fire risk.
Use only designated battery packs to avoid injury and fire.
Have the tool serviced by qualified personnel using identical parts.
Use auxiliary handles if supplied for better control and to prevent injury.
Grip insulated surfaces when near hidden wiring to prevent electric shock.
Secure the workpiece to a stable platform for better control.
Avoid drilling into walls with hidden electrical wiring.
Wear safety goggles or eye protection when using the tool.
Secure the workpiece properly to prevent loss of control and injury.
Never disassemble or operate a damaged charger due to shock/fire risk.
Avoid charging in wet conditions; cracked cases can cause fire.
Keep batteries away from metal objects to prevent shorting and fire.
Never expose batteries to fire or high heat as they may explode.
Do not disassemble batteries; protect terminals before disposal to prevent shorts.
How to operate the trigger switch to turn the tool on and off.
Instructions for changing rotation direction and locking the trigger.
Instructions on how to charge the tool's battery.
How to properly insert bits into the magnetic bit holder.
Procedure for fastening screws without stripping or splitting.
Safety precautions and methods for cleaning the tool.
To Next Page
