Skil 2860 - Trouble Shooting; Tool Will Not Start; Battery Pack Will Not Charge

-18-
&>;A.81%4;;@5:3
Read instruction manual first! Remove battery pack from the tool before making
adjustments or assembling accessories.
&$"'&"")!"&%&$&
#
$" 1. Battery pack not charged.
2. Battery pack not installed properly.
3. Battery pack temperature is too hot or cold for operation.
4. Burned out switch.
$ + 1. If equipped, check battery charge condition lights for charge status.
Charge battery if needed.
2. Confirm battery is locked and secured to the tool.
3. Let battery sit a few minutes or until it reaches normal operating
temperature.
4. Have switch replaced by an Authorized Skil Service Center or Service Station.
&$"'&&$+#)!"&$
#$" 1. Charger not plugged into outlet.
2. Battery pack not completely inserted into charger.
$ + 1. Confirm charger is plugged into outlet.
2. Confirm battery pack is inserted into charger completely.
!
WARNING
SM 1619X04717 04-10:SM 1619X04717 04-10 4/22/10 9:57 AM Page 18