To Next PageTo Next Page
Need help?Do you have a question about the Skil 3375-01 and is the answer not in the manual?
Safety guidelines for the operating environment, including children and cleanliness.
Precautions for the operator's well-being, including alertness and attire.
Advice on proper tool operation, force, and securing the workpiece.
Guidelines for maintaining the tool's condition, cleanliness, and performance.
Key technical details of the sander, including voltage and table size.
Details about the motor's RPM and power requirements.
Instructions for safely connecting the tool to electricity, including grounding.
Steps to attach the disc and its protective guard.
Procedure for mounting the workpiece support.
Steps for assembling and attaching the work table.
Method for positioning the sander vertically.
Process for fitting, tensioning, and aligning the sanding belt.
Instructions for securely attaching the sander to a workbench.
How to safely start, stop, and lock the sander's switch.
Technique for sanding workpieces at an angle using the tilting table.
Adjusting the sander's belt bed orientation between vertical and horizontal.
Method for smoothing surfaces using the belt, including backstop adjustment.
Process for sanding the ends of workpieces on the belt, often vertically.
Techniques for shaping curved surfaces on the idler drum.
How to sand small end surfaces on the disc using the mitre gauge.
General care and cleaning instructions for the sander, including dust removal.
Guidelines on using recommended accessories for safe operation.
General
