To Next PageTo Next Page
Need help?Do you have a question about the Skil 4680 and is the answer not in the manual?
General| Brand | Skil |
|---|---|
| Model | 4680 |
| Category | Power Tool |
| Language | English |
Keep your work area clean, well lit, and free from hazards to prevent accidents.
Guidelines for safe use regarding polarized plugs, grounding, and avoiding wet conditions.
Advice on staying alert, proper dress, avoiding accidental starts, and using safety equipment.
Recommendations for securing workpieces, using the correct tool, and general maintenance.
Emphasizes using qualified personnel and genuine replacement parts for tool service.
Warns against using accessories not recommended by the manufacturer.
Advises on safe cleaning methods and warns about chemicals damaging plastic parts.
Precautions when cutting near wiring and avoiding accidental starts with the trigger.
Keep hands away from cutting area and moving parts like the blade holder.
Use sharp blades and ensure the tool reaches full speed before cutting.
Always wear eye protection; use a dust mask for dust-generating applications.
Secure material properly and ensure screws and blade holder are tight before cutting.
Warning about chemicals in dust from construction activities and how to reduce exposure.
Explanation of common symbols used on the tool for better understanding and safe operation.
Diagram illustrating jigsaw parts and a table of maximum cutting capacities.
Step-by-step instructions for inserting and removing jigsaw blades.
How to control tool speed by adjusting trigger pressure for different materials.
Using the lock-on button for continuous operation at maximum speed.
Guidance on adjusting stroke rate for optimal cutting in various materials.
Operating the laser and site-light features for improved cutting visibility.
Instructions on adjusting and using the laser line guide for precise cuts.
Locating and using the onboard compartment for storing jigsaw blades.
How to connect a vacuum hose for dust and chip extraction via the dust port.
Adjusting the orbital action lever for different cutting speeds and material types.
Using the scrolling knob for 360-degree blade rotation and intricate designs.
Techniques for drawing lines, securing material, and controlling the saw during cuts.
Using a straightedge for accurate straight cuts by keeping the saw foot flush.
How to perform plunge cuts for rough openings without pre-drilling.
Adjusting the foot for bevel cuts and locking the scroll mechanism.
Tips for cutting metal, including speed, blade choice, and lubrication.
Attaching and using the rip fence accessory for straight and circle cutting.
Guidelines for tool service, lubrication, brushes, and bearing replacement.
Safe methods for cleaning the tool, including warnings about solvents.
Recommendations for selecting appropriate extension cords based on tool rating and length.
Details on the 2-year limited warranty, exclusions, and implied warranty limitations.
