15
Chain Kickback Brake Handle
Serves as the lever for chain brake activation.
It also provides protection against projecting
branches and helps prevent the left hand
from touching the saw chain if it slips off the
front handle.
Trigger Switch
Turns the chain saw On and Off.
Lock-off Button
Helps to prevent accidental or unauthorized
activation of the trigger switch. It must be
depressed before the trigger switch can be
activated.
Oil Tank Cap
Seals the oil tank.
Oil-Inspection Window
Provides a view of the oil level in the oil tank.
Guide Bar
Supports and guides the saw chain.
Chain Sheath
The chain sheath keeps the operator from
coming in contact with the sharp chain blades
when the tool is not in use. It also helps
keep the chain blades from being nicked or
damaged during transportation and storage.
Saw Chain
A loop of chain having cutting teeth that cut
the wood when it is driven by the powerhead
and supported by the guide bar.
Front Handle
The support handle for the left hand at the
front of the saw.
Rear Handle
The support handle for the right hand, located
at the rear of the saw.
Chain-Tensioning Adjusting Knob
Permits precise adjustment of chain tension.
Side Cover
Covers the chain sprocket and secures the
guide bar.
Side-cover Knob
Locks/unlocks the side cover.
Storage Rail
A support object for hanging the saw.
To Next Page
Loading...
Need help?
General
