+5%100'%66*'2.7)(41/6*'219'45174%'
#0&146*'$#66'4;2#%-(41/6*'219'4611.
$'(14' /#-+0) #0;#&,756/'065%*#0)+0)
#%%'5514+'5 14 5614+0) 219'4611.5Such
preventive safety measures reduce the risk of
s
tarting the power tool accidentally.
614'+&.' 219'4 611.51761( 6*' 4'#%* 1(
%*+.&4'0#0&&1016#..192'4510570(#/+.+#4
9+6*6*'219'4611.146*'5'+05647%6+10561
12'4#6' 6*' 219'4 611. Power tools are
dangerous in the hands of untrained users.
#+06#+0219'4611.5*'%-(14/+5#.+)0/'06
14 $+0&+0) 1( /18+0) 2#465 $4'#-#)' 1(
2#465#0�16*'4 %10&+6+106*#6 /#;
#(('%66*'219'4611.?512'4#6+10(&#/#)'&
*#8' 6*' 219'4 611. 4'2#+4'& $'(14' 75'
Many accidents are caused by poorly
maintained power tools.
''2%766+0)611.55*#42#0&%.'#0Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
5' 6*' 219'4 611. #%%'5514+'5 #0& 611.
$+65'6%+0#%%14�%'9+6*6*'5'+05647%6+105
6#-+0)+061#%%17066*'914-+0)%10&+6+105
#0& 6*' 914- 61 $' 2'4(14/'& Use of the
power tool for operations different from those
intended could result in a hazardous situation.
'48+%'
#8';174219'4611.5'48+%'&$;#37#.+(+'&
4'2#+4 2'4510 75+0) 10.; +&'06+%#.
4'2.#%'/'062#465 This will ensure that the
safety of the power tool is maintained.
&&+6+10#.#('6;#40+0)5
GFCI and personal protection devices like
electrician’s rubber gloves and footwear will
further enhance your personal safety.
1 01675' 10.;4#6'& 611.59+6*#
219'45722.;While the tool may appear to
work, the electrical components of the AC
rated tool are likely to fail and create a hazard
to the operator.
''2*#0&.'5&4; %.'#0#0&(4''(41/ 1+.
#0&)4'#5'Slippery hands cannot safely
control the power tool.
5'%.#/251416*'424#%6+%#.9#;615'%74'
#0& 5722146 6*' 914-2+'%' 61 # 56#$.'
2.#6(14/Holding the work by hand or against
your body is unstable and may lead to loss of
control.
'8'.12#2'4+1&+%/#+06'0#0%'5%*'&7.'
(14 ;174 611. *'0 %.'#0+0) # 611. $'
%#4'(7.016 61&+5#55'/$.'#0;2146+101(
6*' 611. 5+0%' +06'40#. 9+4'5 /#; $'
/+52.#%'&142+0%*'&145#('6;)7#4&4'6740
524+0)5 /#; $' +/2412'4.; /1706'&
Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Risk of injury to user. The power cord must only
be serviced by a Skil Factory Service Center or
Autho rized Skil Service Station.
1/'&756%4'#6'&$;219'4
5#0&+0)5#9+0) )4+0&+0)
&4+..+0) #0& 16*'4 %105647%6+10 #%6+8+6+'5
%106#+05%*'/+%#.5-019061%#75'%#0%'4
$+46* &'('%6514 16*'4 4'241&7%6+8' *#4/
1/'':#/2.'51(6*'5'%*'/+%#.5#4'
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
!
WARNING
-3-
BM 2610958575 02-09:BM 2610958575 02-09 2/4/09 10:54 AM Page 3