8
SYMBOLS (CONTINUED)
IMPORTANT:
Some of the following symbols may be used on your tool. Please
study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and more safely.
Symbol Designation / Explanation
V Volts (voltage)
A Amperes (current)
Wh Watt-hours (battery capacity)
Ah Ampere-hours (battery capacity)
Ø Diameter (size of drill bits, grinding wheels, etc.)
n
0
No load speed (rotational speed, at no load)
.../min
Revolutions or reciprocation per minute (revolutions, strokes, surface
speed, orbits etc. per minute)
Nm Newton meter (torque)
Ibs.in Inch pounds (torque)
Direct current (type or a characteristic of current)
Designates Li-ion battery recycling program
Alerts user to read manual
Alerts user to wear eye protection
This symbol designates that this tool is listed by Underwriters
Laboratories, to United States and Canadian Standards.
This symbol designates that this tool is listed by the California
Energy Commission.
To Next Page
Loading...
Need help?
General
