What to do if touchscreen responds, but does not behave as expected on Skip-Line CVO-312 DVR?
If the touchscreen on your Skip-Line DVR responds but doesn't behave as expected, ensure the USB cable has a solid connection on both ends and isn't damaged. If the issue persists, re-calibrate the touchscreen.
What to do if video does not appear on Skip-Line CVO-312 DVR?
If video does not appear on your Skip-Line DVR, check the following: * Monitor power * Monitor video cable * Camera video cables * Camera power Also, make sure the correct video input is selected.
What to do if touchscreen does not respond to screen presses on Skip-Line CVO-312 DVR?
If the touchscreen on your Skip-Line DVR does not respond to screen presses, check that the USB cable is plugged in between the monitor and the CVO. Also, inspect the USB cable and connectors for any damage.
Why overlay information does not appear on Skip-Line CVO-312 DVR?
If overlay information does not appear on your Skip-Line DVR, check the following: * Data Logger PC configuration * Skip timer power * Bridge unit power and connection to skip timer * CVO antenna is present, connected tightly, and not damaged * Skip timer connections and power
General| Video Compression | H.264 |
|---|---|
| Operating System | Embedded Linux |
| Network Connectivity | Ethernet |
| Power Supply | 12V DC |
| Video Input | 4-Channel BNC |
To Next Page