HOW TO WEAR THE HELMET
Important: In order to guarantee adequate
protection the helmet must be adjusted and
worn correctly every time you use it.
The helmet must fit perfectly and be
comfortable. If not choose another size or
model.
Put the helmet on and turn the dial clockwise
(see fig.1) to regulate the size until you obtain
a stable, comfortable fit. The helmet must fit
correctly in a horizontal position on the head,
it should cover the forehead and allow a wide
range of vision (see fig.2).
Adjust the divider of the chin strap (fig.3),
making sure that both straps are the same
length. Regulate and tighten the strap to stop
the helmet coming off the head (fig.4). The
helmet, when fitting correctly, should not
move in any direction.
For a better fit you can regulate the height of
the closing system (A): remove the helmet and
move the pin to one of the two holes in dial B
(fig.25) and check it.
Every modification not recommended by
the manufacturer could affect the correct
performance/protection of the helmet. Always
use original accessories only.
Thanks to the fixing device on the helmet it is
possible to attach a headlamp.
To Next Page
Loading...