AERO HELMET
WARNING: For your safety please read the
following instructions carefully before using
this item!
This helmet is an item of category II personal
protective equipment (PPE) and has been
designed and manufactured in accordance
with EU regulation 2016/425 and the
harmonised technical standards for alpine
skiing and snowboarding (regulation EN
1077:2007/B) and mountaineering (regulation
EN 12492:2012).
The EU declaration of conformity can be found
at www.skitrab.com.
This article of PPE is a lightweight,
comfortable helmet designed to protect your
head from impact due to falls during the
aforementioned activities and/or rock falls
(a frequent occurrence when ski touring).
An item of PPE is not a guarantee of safety;
though it limits injuries to the covered area, it
cannot protect you from every kind of impact
or accident, and cannot exclude the possibility
of death or permanent disability. The helmet
is constructed in such a way as to absorb
the energy of an impact through the partial
destruction or damage of its components.
Even if the helmet does not show any evident/
visible signs of damage after an impact (fall or
blow) it must be substituted and destroyed. It
is highly recommended to change the article
10 years after the date of production even
if it has rarely or even never been used. The
date of production is shown on the helmet,
its durability depends on a variety of factors
including sun exposure, temperature and
use (extreme use can drastically reduce its
lifespan). In case of doubts over the safety of
the product, substitute it. Use this helmet only
for the activities for which it is designed!
It is forbidden to make any modifications to
the helmet or to add, modify or remove any of
its components.
To Next Page
Loading...