Do you have a question about the Skoda iV Charger and is the answer not in the manual?
Charging Cable | Type 2 |
---|---|
Installation | Wall-mounted |
Charging Power | 11 kW |
Connectivity | Wi-Fi |
Authentication | RFID |
Protection | Overcurrent, Overvoltage, Short Circuit, Overheating |
Input Voltage | 230 V AC |
Output Voltage | 400 V AC |
Output Current | 16 A |
Power Output | 11 kW |
Cable Length | 5 m |
Protection Class | IP54 |
Compatibility | All electric vehicles with Type 2 connector |
Dimensions | Varies depending on model |
Details severe risks like electric shock, explosion, and injury.
Covers warnings about improper usage, adapters, heat, and conditions.
Details electrical connection capacity, charging capacity, and modes.
Step-by-step guide on initiating and ending a charging session.
Explains LED descriptions and different wallbox status states.
Details various wallbox states and their corresponding displays.
Lists requirements, safety warnings, and location choice for installation.
Critical advice on grounding, input, MCB, RCD.
Illustrates different power supply wiring configurations (3-phase, 1-phase).
Highlights severe risks of electric shock and damage during installation.
Step-by-step guide for mounting the wall bracket securely.
Instructions for preparing the main assembly, including cable routing.
Instructions for connecting power supply cables.
Step-by-step guide for local wallbox configuration via Wi-Fi.
Safety warnings for troubleshooting procedures.
Details LED states, error codes, and solutions for wallbox issues.