Skoda Kamiq 2019 User Manual

Workshop Manual
Fabia III 2015 ➤, Kamiq 2019 ➤,
Karoq 2018 ➤, Karoq 2020 ➤,
Octavia III 2013 ➤, Octavia III 2014 ➤,
Octavia IV 2020 ➤, Octavia IV 2021 ➤,
Scala 2019 ➤
Automatic gearbox 09G
Edition 02.2021
Service
Service Department. Technical Information

Skoda Kamiq 2019 Specifications

General

Brand	Skoda
Model	Kamiq 2019
Category	Automobile
Language	English

Summary

00 - Technical data

1 Safety instructions

Provides essential safety precautions for working on vehicles with start-stop systems and during road tests.

3 Repair instructions

General guidelines for performing gearbox repairs, focusing on cleanliness and basic procedures.

32 - Torque converter

1.2 Removing and installing torque converter

Step-by-step instructions for the removal and installation of the torque converter, including special tools.

37 - Controls, housing

1 ATF circuit

1.2 Removing and installing ATF radiator

2 ATF

2.1 Inspecting ATF level

2.2 Draining and filling ATF

3 Removing and installing the gearbox

Detailed steps for removing and installing the entire gearbox assembly.

38 - Gears, control

1 Slide valve body

Overview and procedures for removing and installing the slide valve body and its related components.

1.2 Remove and install wiring harness of encoders and solenoid valves

Instructions for removing and installing the wiring harness for encoders and solenoid valves.

1.3 Removing and installing the slide valve body

Step-by-step guide for removing and installing the slide valve body.

1.4 Removing and installing oil pan

1.5 Removing and installing the oil filter

1.6 Removing and installing the gearbox input rpm sender G182 and the transmitter for the Gearbox output speed sender G195

39 - Final drive - differential

1 Sealing rings

1.1 Replacing left sealing ring

1.2 Replacing right sealing ring

2 Gearbox control system

Instructions for removing and installing the gearbox control unit for various vehicle models.

2.1 Removing and installing gearbox control unit