As the unit only functions after entering the safety code, this practically excludes
its use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual input of the code is normally not necessa-
ry.
Enter code
›
Switch on the radio with the ignition turned on. SAFE is displayed and then
1000.
›
Use the selection buttons
1
-
4
to enter the safety code.
›
Confirm the safety code by pressing the
6
function button.
If an incorrectly entered code is confirmed, the procedure can be repeated once
again.
If the code number is entered incorrectly for the second time, the unit will be
blocked for approx. one hour. It is possible to enter the safety code again after
one hour has expired if both the device and the ignition have stayed turned on
during that time.
The cycle - two attempts, blocked for an hour - will continue to apply.
Device specification and operation
Device specification
Fig. 1 Equipment overview
Setting knob
›
for switching the equipment on and off (press)
›
for volume control (turn)
›
other function settings in various menus
MENU
rocker switch to access a menu for setting the parameters of the de-
vice or CD Player
Rocker switch
for sound adjustment
Rocker switch
AS
to automatically store the station
Rocker switch
SCAN
to activate the AM radio mode
›
fast search in the respective waveband
›
Scroll through the contents of the CD
CD-eject button
CD case
Button
CD
to activate the CD mode
Rocker switch
TP
to activate the reception of traffic reports
Rocker switch
A/F
to switch over between the wavebands AM/FM
Rocker switches
/
and
/
›
manual tuning or switching to the next/previous preset radio station
›
Track selection or fast forward/rewind in CD mode
1
2
3
4
5
6
7
8
9
10
11
3
General information
To Next Page
Loading...
Need help?
General
