Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
– Install the rear part -5- of the exhaust system ⇒ Rep. gr. 26;
Silencer/muffler; Removing and installing rear part of ex‐
haust system.
– Install the tunnel cross-piece ⇒ External body repairs; Rep.
gr. 66; Underbody protection; install and remove tunnel
cross-piece.
– Setting selector lever control cable ⇒ a2.7 nd adjusting the
selector lever control cable”, page 141 .
– Inspect gearshift mechanism ⇒ t2.4 he gearshift mecha‐
nism”, page 120 .
– Install air filter housing:
♦ Petrol engines ⇒ Rep. gr. 24; Air filter; Removing and instal‐
ling air filter housing.
♦ Diesel engines ⇒ Rep. gr. 23; Air filter; Removing and instal‐
ling air filter housing.
2.5.2 Removing and installing the selector
lever control cable Rapid NH, vehicles
from 06/2015
Special tools and workshop equipment required
♦ Release tool -T10236-
Removing
– Remove the complete air filter ⇒ Rep. gr. 23; Air filter;
Removing and installing the air filter housing, if necessary
Octavia III 2013 ➤, Octavia III 2014 ➤, Rapid NH 2013 ➤, Rapid NH 2014 ➤
Gearbox 0CW-DSG - Edition 07.2022
2. Shift mechanism 129