To Next PageTo Next PageWhat to do if my Skov Control Systems has a power supply issue?
If you suspect a power supply issue with your Skov Control Systems, check if there is supply voltage on all modules. A defect power supply may be the cause.
How to troubleshoot antenna problems with Skov Control Systems?
If you are experiencing antenna problems with your Skov Control Systems, try moving the antenna to a different position to see if it increases the signal strength. The transmitter and receiver may be located too far from each other.
What to do if my Skov Control Systems cable connection is not working?
If your Skov Control Systems has no cable connection, check the antenna cable and data cable. Ensure the antenna cable is secured and mounted without sharp bends, maintaining a minimum radius of 25mm. The cause may be simply that there is no cable connection.
How to fix a cable connection issue in Skov FarmOnline+ DataLink 131545 Control Systems?
To fix a cable connection issue in your Skov Control Systems, check that the aerial cable has been secured and mounted without sharp bends. The cause may be incorrect cable mounting.
What to do if there is an error in the electronics of my Skov Control Systems?
If there is an error in the electronics of your Skov Control Systems, the cause may be defect modules. Contact the service department regarding troubleshooting and replacement.
General| Brand | Skov |
|---|---|
| Model | FarmOnline+ DataLink 131545 |
| Category | Control Systems |
| Language | English |
