02 USER GUIDE
Congrats on making the wise choice of picking
up the ultra-stylish Skullcandy Method headset.
No doubt you will be the envy of friends and
foes alike, so take a minute and give yourself
props for your remarkably good taste. First
things first, you are going to want to charge
the thing. The headset is pre-charged before
leaving the factory, but enough time will have
likely passed since then, so a re-juice is highly
recommended.
FIRST TIME USE
Play/Pause
Fast Forward/Track Forward
Answer Call/End Call
Rewind/Track Back
Volume Up, Volume Down
Charging Port
CHARGING WITH USB CABLE
1 // To connect cable, use the port below
the control panel of the left earpiece. You can
connect the cable to the USB slot of any
PC or Mac.*
2 // While firing up, the light indicator will be
RED. To let you know when the process
is finished, light will turn GREEN.
3 // Low Battery function will be indicated with
a blinking RED light and an audible tone
going off once a minute to let you know when
its time to re-fuel the device
.
* It is recommended to charge your Method in an
environment between 41�-104�F. Only use included
charging cable. Using an unauthorized charger may
cause damage.
To Next Page
Loading...