Sky Team T-Rex 50 User Manual

Essential information about the first 1600km for maximum motorcycle life and performance.

Guidelines for safe accessory installation to prevent unsafe operating conditions.

Personal safety of the rider may be involved, disregarding this information could result in injury.

Precautions to ensure rider safety and enjoyment while riding a motorcycle.

Emphasizes helmet importance and advises on choosing quality riding apparel for safety.

Recommends thorough pre-ride inspections and practicing to master the machine.

Riding within skill limits, caution in bad weather, and strategies to enhance visibility.

Warns that modifications or removal of original equipment may render the vehicle unsafe or illegal.

Identifies key components on the handlebars.

Identifies key components on the motorcycle body.

Details the front disc and rear drum brake systems and their importance for safety.

Information on handling brake fluid, checking level, and brake lining wear.

Instructions for adjusting the rear brake pedal free travel and rear brake light switch.

Details on clutch adjustment, free play, and potential issues when shifting gears.

Further steps for clutch adjustment and checks for cable condition.

Explains the operation of the three-way fuel valve (OFF, ON, RES).

Instructions on opening, closing, and refueling the fuel tank, along with safety warnings.

Recommendation for petrol type and its benefits, with a notice about spark knock.

Procedure for checking engine oil level using the dipstick, with a warning about low oil.

Importance of proper tire inflation for handling, tread life, and comfort, with warnings about under/overinflation.

Guidance on checking tire treads and sidewalls for wear, damage, and foreign objects.

Specifies the minimum tread depth limit for tire replacement.

Advice on repairing or replacing punctured or damaged tubes.

Importance of using recommended tire size/type and ensuring proper installation.

Explains the function of the ignition switch for preventing unauthorized use and starting the motorcycle.

Details on speedometer, odometer, turn signal, neutral, and high beam indicator lights.

Describes horn, turn signal, dimmer, and passing switches on the left handlebar.

Describes brake lever, stop switch, light switch, start button, and throttle grip on the right handlebar.

Essential checks performed before each ride to ensure the motorcycle's condition and safety.

Steps for starting the engine under normal air temperature conditions.

Procedures for starting the engine in hot or cold weather conditions.

Steps to clear a flooded engine if it fails to start after repeated attempts.

Guidance on how to ride during the initial period to ensure motorcycle reliability and performance.

Reminder to review safety, and ensure the side stand is retracted before riding.

Detailed steps on how to shift through the gears, including upshifting and downshifting.

Information about operating at high altitudes and potential carburetor modifications.

Guidance on normal and maximum deceleration braking techniques and safety reminders.

Steps for safely parking the motorcycle, including transmission, fuel valve, and ignition switch.

Advice on preventing motorcycle theft, including registration, parking, and additional security.

Explains why regular maintenance is essential for safety, economy, and performance.

Instructions and warnings related to performing maintenance tasks safely.

General safety precautions to follow before and during maintenance.

A schedule outlining required maintenance tasks at specific intervals.

Lists maintenance items with their frequency and service requirements.

Information on frame and engine serial numbers for registration and parts ordering.

Indicates the location of frame and engine numbers.

Instructions for servicing, cleaning, and reinstalling the air cleaner.

Details on selecting and using quality engine oil based on API classification and viscosity.

Further information on engine oil quality, change frequency, and proper disposal.

Explains the importance of changing transmission oil and the procedure for doing so.

Information on recommended spark plugs, heat range, inspection, and replacement.

Procedure for adjusting the engine idle speed for optimal performance.

Steps for inspecting the throttle cable for smooth rotation and proper routing.

Detailed steps for adjusting the throttle grip free play.

Guidance on checking drive chain slack, lubrication, and potential wear.

Procedure for checking drive chain wear beyond its service limit.

Guidance on inspecting sprocket teeth for wear or damage.

Steps for adjusting the drive chain slack and tightening the rear axle nut.

Recommended lubricants and procedure for lubricating the drive chain.

Steps for removing, cleaning, and inspecting the drive chain and sprockets.

Instructions for inspecting wheel rims and spokes for damage and proper tension.

Procedure for removing and installing the front wheel, including axle nut tightening specifications.

Procedure for removing the rear wheel, including axle nut tightening and brake adjustment.

Checks for front fork operation, oil leaks, and mounting bolt security.

Periodic checks for swingarm bushings, fasteners, and shock absorber oil leaks.

Instructions for checking the side stand spring and assembly, and lubricating pivot points.

General advice on cleaning the motorcycle, avoiding certain products and high-pressure water.

Step-by-step guide for washing the motorcycle, including rinsing and drying.

Recommendations for polishing or waxing the motorcycle after washing.

Steps for preparing the motorcycle for extended storage, including oil change and fuel draining.

Procedures for uncovering, cleaning, and inspecting the motorcycle after storage.

Overall dimensions and dry weight of the motorcycle.

Key performance data like fuel consumption, max speed, power, torque, and idle speed for different models.

Fuel tank capacity, passenger capacity, and engine specifications.

Electrical system details including ignition type, generator, battery, and lights.

Details on indicator lights, horn, fuse, and lighting specs.

Specifications for caster angle, tire sizes, and suspension components.

Gear ratios and final reduction for the power transmission system.

A comprehensive electrical schematic showing all wiring and components of the motorcycle.