Sky Team T-Rex 125 - User Manual

Guidelines for initial 1,600km for maximum motorcycle life and performance.

Explains special meanings of WARNING and NOTICE for safety and service clarity.

Principles for safe and correct installation of motorcycle accessories.

Importance of safety helmet, eye protection, and proper riding apparel.

Performing checks before riding and knowing the motorcycle controls.

Advice on staying within personal limits and knowing speed limitations.

Safety tips for bad weather and avoiding traffic hazards.

Locates ignition switch, levers, and throttle grip on the handlebars.

Identifies kick starter, brake pedal, gearshift pedal, and side stand.

Checking and maintaining the correct brake fluid level and type (DOT 4).

Checking brake lining wear against the limit mark for safety.

Adjusting rear brake pedal free play for optimal performance.

Adjusting clutch lever free play to 10-20mm for smooth gear shifting.

Explains the function of OFF, ON, and RES positions of the fuel valve.

Procedures for opening the fuel cap and refueling safely.

Daily check of engine oil level using the dipstick, ensuring it's between marks.

Importance of checking tire pressure when tires are cold for accuracy.

Inspecting treads and sidewalls for wear, cuts, bumps, or bulges.

Minimum tread depth limits for replacing front and rear tires.

Guidance on repairing or replacing punctured motorcycle tubes.

Importance of using recommended tire sizes for safety and performance.

How the ignition switch prevents unauthorized use and controls the motorcycle.

Explains the function of the speedometer, odometer, and various indicator lights.

Details on horn, turn signals, dimmer, and passing switches.

Explains brake lever, stop switch, start button, and throttle grip.

Essential safety checks to perform before every motorcycle ride.

Steps before starting: key, neutral, fuel valve.

Step-by-step guide for starting the engine under normal temperatures.

Procedures for starting in high and low air temperatures.

Steps to clear excess fuel if the engine fails to start.

Guidelines for initial riding to ensure reliability and performance.

Ensures side stand is retracted and side stand mechanism is understood.

How to shift gears smoothly using clutch and throttle coordination.

Effects of high altitude on mixture and potential carburetor modifications.

Proper application of brakes for normal and maximum deceleration.

Steps for parking safely on level ground and using the side stand.

Recommendations for securing the motorcycle against theft.

Explains why maintenance is essential for safety, economy, and reliability.

General safety rules for performing maintenance, including engine off and cooling.

Covers hazards like exhaust fumes, hot parts, moving parts, and fuel safety.

Explains where to find frame and engine serial numbers for registration and parts.

Steps for washing and soaking the air cleaner element.

Importance of oil quality and when to change engine oil.

Procedure for changing transmission oil and checking level.

How to inspect, check gap, and replace spark plugs correctly.

Adjusting idle speed with the throttle stop screw to the specified RPM.

Checking throttle cable for smooth operation and lubrication needs.

Checking drive chain slack and adjusting it to the specified range (25-35mm).

Checking wheel rims and spokes for damage and tension.

Step-by-step guide for removing and installing the front wheel assembly.

Checking fork operation for smoothness and leaks.

Checking swingarm bushings, fasteners, and shock absorber units.

Inspecting the side stand spring and assembly for proper movement.

Procedures for washing the motorcycle, avoiding certain areas and products.

Using polishes or waxes to protect surfaces after cleaning.

Steps to take before storing the motorcycle, like changing oil and draining fuel.

Steps for uncovering, cleaning, and inspecting the motorcycle after storage.

Technical data on the motorcycle's physical size and weight.

Key performance metrics like speed, power, and torque.

Details on engine size, spark plug, battery, and lights.

Specifications for caster angle and tire sizes.

Gear ratios for different gears and final reduction.