Chapter 3 Instructions
Windows is the Host Computer’s style, the system will display the menu related information
when you move the mouse to operation interface, but if the mouse left, the menu will hide them.
Special Note: All the DVR we sell is with PS/2, which is convenient for you to
operate.
3.0 Menu
Note: All the menu will be in English, → the right menu was the left menu’s
submenu .We will mostly introduce the panel/remote control operation menu in
simple way as follow:
● 1CH/4 CH interchange
When mouse is in the 4CH, if you click one channel, it will show full screen; if you click left
mouse, and then will be back.
Panel/Remote control for 4 CH, press CH4 to show full screen of related channel, press
QUAD back to 4CH.
● Forcedly shut down
Turn “NO/OFF” button at the back of host computer can meet your will.
Note: forbidden to forcedly shut down in usual time to protect the hard disk!
● Soft shut down
Shut up in Menu: System Shutdown to shut down operation, choose Shutdown or Reset,
and then press “OK”, system will shut down or reset.
● Multi-languages
The system support multi- languages in display, it support English,
simplified/traditional Chinese. Right button of the screen displays the currently using
language; use the mouse to click Change to other languages.
Panel/remote control operation: in the browse time, press “menu” to back to the main
menu, press right and left directions keys to dynamic page to the languages place, and
then use the up and down direction keys to interchange languages versions.
● MAC address setup
System support setting up the MAC address of net card in the SATA, see the setting
mode as below:
1) After system opening, input “abc”, then press the “OK”, you will see the DOS prompt
To Next Page