Mechanical Structures and Installations
D24 24 Channel Constant Voltage DMX512 & RDM Decoder
DMX Signal out
DMX Master
RGB LED strip x 4
Power Supply
12-24VDC
Constant Voltage
AC100-240V
RGB LED strip
RGB LED strip
RGB LED strip
RGB LED strip
RGB LED strip
RGB LED strip
RGB LED strip
RGB LED strip
RGB LED strip x 4
1-4 RGB LED output
DMX output
DMX input
5-8 RGB LEDoutput
Power input -
Power input +
Power input -
Power input +
LED indicator
Digital display
Setting key
DIN Rail Mounting Size:
TS-35/7.5 or TS-35/15
Installation rack
Note:
1. An DMX signal amplifier is needed if more than 32
decoders are connected, or use overlong signal line,
signal amplification should not be more than 5 times
continuously.
2. If the recoil effect occurs because of longer signal line
or bad line quality, please try to connect 0.25W
90-120Ω terminal resistor at the end of each line.
Wiring Diagram
User Manual Ver 1.0.2
www.iskydance.com
Page 2
To Next Page
Loading...