Height Floo
Determines if the Skydio 2 will always attempt to stay at least 8 ft above
the subject when following, even at the expense of tracking performance.
See the Understanding Height Floor section for more details about this
important setting.
Drone Settings
Controller Settings (when Controller accessory is connected
Gimbal Sensitivity
Controls how quickly camera gimbal pitches up and dow
Flight Sensitivity
Allows users to switch between default and custom sensitivity settings for
the roll, pitch, yaw and throttle inputs
The default setting are xed and cannot be changed
Users may change the custom settings however they wish
Phone Settings
Toggles the display of vehicle telemetry data. When enabled, Skydio 2’s
current speed, height above take o, and range from launch point is
displayed while in ight
Flight Telemetry
Slide (default) - Single stick with pitch and roll with yaw on separate
button
Steering - Single stick with pitch and yaw with roll on separate button
Dual Sticks - Traditional Mode 2 dual-stick control
App Controls
Sets the control style for the Dual Sticks app control setting. Allows you to
choose between Mode
1
, Mode 2 (default), and Mode
3
style controls
Dual Sticks Mode
Displays the current strength of the user’s radio link to the Skydio 2 while in ight. As
the signal strength decreases, users may experience a lower quality video feed or a
delay in their controls. For best signal quality, always maintain a direct line of sight
between the phone or controller and the Skydio 2 and avoid ying in areas with
electromagnetic interference
Signal Strength
I
ndicator
7
To Next Page
Loading...
