Provides access to the camera settings and allows users to change between video
and photo recording mode. Skydio 2 can capture photos or video but not both at
the same time. Users may change their camera settings at any time before or
during ight. Please note that changing the camera settings before launch may
cause Skydio 2 to return to the pre-ight screen and re-calibrate its vision system.
Some camera settings (such as video resolution and framerate) cannot be changed
while autonomously tracking a subject. Skydio 2 must be under manual control to
change these settings
Video Capture Settings
Resolutio
Framerat
HDR On/O
Auto / Manual Recordin
Video Codec*
White Balanc
Shutter Spee
IS
Exposur
Camera Capture Settings
Photo Interval**
O / 1s or 2s**** / 5s / 10
HDR On/O
JPG / JPG+DNG****
White Balanc
Shutter Spee
Exposur
Camera Settings
8
Displays the current battery level of the Skydio 2 drone.
Battery Indicator
* HDR is not supported in all video resolutions and framerates
** Skydio 2 can record video in either AVC (H.264) or HEVC (H.265). Dierent mobile devices and
personal computers have dierent compatibilities with these encoding standards. Be sure to choose
the encoding standard that is best suited to your desired workow
To Next Page
Loading...
