EasyManua.ls Logo

Skydio 2 - Activate the Skydio app

Skydio 2
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
While the Skydio 2 is ying autonomously, such as following a subject or ying to a
waypoint, the user may tap the red stop button to cancel the current action and
place the drone into manual control mode
While the Skydio 2 is in manual control mode the land button is available. The user
may press and hold the land button for 3 seconds to command the drone to land at
its current location
Land button during autonomous igh
Land button during manual igh
Stop/Land Button
The blue & white + icon indicates a person or vehicle the Skydio 2 is capable of
tracking. Tapping the indicator will command the Skydio 2 to enter autonomous
ight mode with the selected object as the tracking subject
Subject Indicator
Subject available for tracking Subject being actively tracke
9
*** When Photo Interval is enabled Skydio 2 will continuously capture photos at the specied time
interval until the setting is disabled or the ight ends
**** The fastest interval photo setting when capturing in raw DNG is two seconds. Users may capture
a photo every one second when capturing in JPG mode
***** DNG photos are not displayed in the media tab of the Skydio 2 app and may be retrieved
directly from the microSD card

Other manuals for Skydio 2

Related product manuals