To Next PageTo Next PageWhat to do if my Skyjack 4632 power extension platform will not extend or retract?
If the power extension platform on your Skyjack Scissor Lifts won't extend or retract, here are a few things you can try: - Move the switch to the lift position. - Check the continuity and replace if defective. - Check the switch and replace if defective. - Check the diode and replace if defective.
What to do if there is no down or reverse only function from platform controls on Skyjack Scissor Lifts?
If there is no down or reverse only function from the platform controls on your Skyjack Scissor Lifts, check the switch and continuity, and replace if defective.
What to do if there is no down function from platform controls on Skyjack 4632 (CE Machines Only)?
If there is no down function from the platform controls on your Skyjack Scissor Lifts (CE Machines Only), check the continuity and replace if defective.
General| Working Height | 38 ft |
|---|---|
| Platform Height | 32 ft |
| Lift Capacity | 500 lbs |
| Drive Speed (Elevated) | 0.5 mph |
| Gradeability | 25% |
| Turning Radius (Inside) | 0 in |
| Power Source | Electric |
| Tire Type | Non-marking |
| Platform Height (Metric) | 9.75 m |
| Maximum Working Height (Metric) | 11.58 m |
| Capacity (Metric) | 227 kg |
Details the terms of the manufacturer's warranty and service policy.
Provides critical safety advice and reminders for operators.
Highlights the risk of electrocution and necessary safety measures.
Lists essential safety measures to prevent accidents during operation.
Details the hydraulic system components and schematics.
Provides electrical diagrams and schematics for system components.
Guides users through diagnosing and resolving electrical system faults.
Guides users through diagnosing and resolving hydraulic system faults.
Provides a schedule for routine maintenance and inspection tasks.
Covers procedures for maintaining and repairing hydraulic systems.
Details procedures for adjusting system and lift pressures.
Offers specific troubleshooting steps for OEM joystick issues.
