To Next PageTo Next PageWhat to do if my Skyjack SJIII power extension platform will not extend or retract?
If the power extension platform on your Skyjack Scissor Lifts won't extend or retract, here are a few things you can try: - Move the switch to the lift position. - Check the continuity and replace if defective. - Check the switch and replace if defective. - Check the diode and replace if defective.
What to do if there is no down or reverse only function from platform controls on Skyjack SJIII Scissor Lifts?
If there is no down or reverse only function from the platform controls on your Skyjack Scissor Lifts, check the switch and continuity, and replace if defective.
What to do if there is no down function from platform controls on Skyjack Scissor Lifts (CE Machines Only)?
If there is no down function from the platform controls on your Skyjack Scissor Lifts (CE Machines Only), check the continuity and replace if defective.
General| Brand | Skyjack |
|---|---|
| Model | SJIII Series |
| Category | Scissor Lifts |
| Language | English |
General information, definitions, and overview of the manual's scope.
Critical guidelines and warnings for safe operation and handling of the aerial platform.
Detailed safety measures and prohibitions to prevent accidents and injuries.
Covers operator qualifications, responsibilities, and inspection schedules.
Identifies major components, assemblies, and specific parts of the platform.
Details visual, daily, and functional checks for safe operation.
Procedures to verify that all platform functions operate correctly before use.
Step-by-step guide for starting, driving, steering, and using platform functions.
Covers guardrail folding, doorway movement, winching, towing, and emergency lowering.
Procedures for servicing and charging the platform's batteries.
Importance of preventive maintenance and battery disconnection before repairs.
Identification and warning labels located on the right side of the platform.
Identification and warning labels located on the front side of the platform.
Identification and warning labels located on the left side of the platform.
Identification and warning labels located on the back of the platform.
Labels and instructions for the platform's control console.
