SKYJACK, Page 65SJIII Compacts & Conventionals
February 2008
Tables Section 2 - Operation
Table 2.8 Operator’s Checklist
N/A P F R N/A P F R
Function Tests
60600AA-CE
Test Tilt Sensor
Test Lowering Warning
Test Horn
Test Pothole Sensor
Test Speed Limit
Test Steering
Test Driving
Test Brakes
Test Platform Raising/Lowering
Test Emergency Lowering
Test Free-wheeling
Test Platform Emergency Stop
Test Enable Trigger Switch
Rollers
Lift Cylinder(s)
Test Base Emergency Stop
Test Platform Raise/Lower Switch
Test Enable Button (If Equipped)
Powered Extension Control Console (If Equipped)
Lifting Mechanism
Test Main Power Disconnect Switch
Base Control Console
Platform Control Console
Maintenance Support
Scissor Assembly
Scissor Bumpers
Platform Assembly
Lanyard Attachment Anchors
Platform Control Console
Manuals
AC Outlet on Platform
Electrical Panel
Proportional and Main Manifolds
Load/Tilt Sensor
Emergency Lowering Access Rod (If Equipped)
Hydraulic/Electric Side
Hydraulic Tank
Hydraulic Oil
Hydraulic Pump and Motor
Pothole Protection Device
Pothole Protection Device
Battery Tray
Battery Charger
Battery
Steer Cylinder Assembly
Wheel/Tire Assembly
Tie Rod (Conventionals)
Greasing Points
Brakes
220V Outlet Receptacle
Ladder
Battery Tray Side
- REPAIRED
- NOT APPLICABLE
DAILY
FREQUENTLY
s each item is inspected, check the appropriate box.
- PASS
- FAIL
OPERATOR'S CHECKLIST
Each item shall be inspected using the the appropriate section of the Skyjack operating manual.
Serial Number:
Model:
Hourmeter Reading:
Date:
Time:
Operator's Name (Printed):
Visual and Daily Maintenance Inspections
Labels
Electrical
Limit Switches
Free-wheeling Valve Knob
Hydraulic
Entrance Side
Main Power Disconnect Switch
Base Control Switches
Note:
Make a copy of this page or visit the Skyjack web site:
www.skyjack.com for a printable copy.
�
�
�
�
To Next Page
Loading...
Need help?
General
