Need help?Do you have a question about the SkyLine SK GoIP and is the answer not in the manual?
Company introduction and history of Skyline International Communication Co., Ltd.
Lists key features of the GoIP device including encryption and codec support.
Describes SIP protocols, codecs, and user management features.
Details GSM network types, frequency bands, and SIM card specifications.
Lists physical interfaces such as WAN, LAN, and USB ports.
Covers user management programs and remote control capabilities.
Details WCDMA network types and antenna connector specifications.
Explains the total SIM capacity and SIM rotation mechanism.
Describes the LEDs for each channel and their corresponding SIMs (ABCD).
Procedure to restore factory default settings by pressing a button.
Details the power input and output specifications for the device.
Description of the LAN Ethernet port and its adaptive speed.
Description of the WAN Ethernet port and its default IP address.
Details the USB serial port and its baud rate configuration.
Explains the fan modes (ON/Automatic) and operating conditions.
Steps to connect the power adapter and network cable to the GoIP.
How to find and verify the device's default WAN IP address.
Instructions to access the web interface using the device's IP address.
Configuration interface for setting up the WAN connection.
Explanation of DHCP mode for automatic IP address assignment.
Procedure for manually configuring the IP address, subnet mask, and gateway.
Settings for SIP server registration, including account and password.
Step-by-step guide to modify the default WAN IP address of the GoIP.
Instructions for downloading and installing a softphone like X-Lite.
Details on configuring the softphone account with domain and proxy settings.
Table showing SIM card binding and port operations for SIM management.
Overview of device status indicators like registration and module status.
Details on call status indicators and SIM mobile network status (SIM Led).
Table displaying call data such as calls, alerted, connected, and fails per port.
Shows SIP registration status and module operational status (ON/OFF).
Explanation of how WAN and LAN ports are used for network connectivity.
Details of the WAN connection mode, status, IP, gateway, and MAC address.
Details of the LAN IP address, subnet mask, and DHCP server status.
Information on current time, running time, firmware version, and release time.
Displays total SMS numbers received, sent, and sent successfully per SIM.
Monitors inter-calling status, duration, inbound, and outbound calls.
Reference to the 'Connect To Network' section for network configuration.
Configuration of SIP server parameters, including protocol mode and encryption.
Configuration for STUN support to enable media traversal for NAT.
Enabling proxy encryption for secure communication.
Settings for frequency band and locking the mobile operator.
Table for binding SIM cards to ports and managing operations.
Using USSD commands for SIM services like checking frequency and balance.
Configures max channels, lowest valid signal, and switch period.
Manages SIM connections to base stations, including white/black lists.
Enables automatic connection to base stations with best signal.
Register SIMs to the base station with the best signal automatically.
Register SIMs to base stations in the list sequentially.
Updates the current status of base station connections.
Managing dynamic IMEI lists with start number and capacity.
Setting up dial patterns using regular expressions for call routing.
Configures original and translated prefixes for outbound calls.
Lists rules for modifying outbound call prefixes.
Lists rules for modifying inbound call prefixes.
Hides the SIM number when making VoIP calls.
Manages a list of blocked numbers or prefixes.
Manages a list of allowed numbers or prefixes.
Settings for unblocking SIM cards using a PIN code.
Enables GoIP billing, call hang-up on low balance, and USSD balance check.
Displays a list of mobile network providers and their query methods.
Configures keywords for analyzing SMS data and balance.
Explanation of fields for USSD and SMS query keyword configurations.
View received SMS messages with sender, time, and content details.
Detailed view of selected SMS messages, allowing reply or delete.
Options for SMS format (PDU/TXT) and forward protocol (GSM/SIP/HTTP).
Specifies recipient phone numbers, separated by semicolons.
Specifies the content of the SMS message to be sent.
Enables sending SMS via the local SIM card on the gateway.
Schedules SMS sending based on the device's online time.
Schedules SMS sending based on consecutive failed calls.
Schedules SMS sending based on consecutive successful calls.
Schedules SMS sending based on the duration of calls.
Interface for selecting ports and sending single or bulk SMS messages.
Sets up automated schedules to avoid SIM card blocking.
Configures SMS alerts for the gateway manager when SIMs are locked.
Limits SIM usage based on total online time, with duration settings.
Limits SIM usage based on accumulated call duration.
Limits SIM usage based on the number of connected calls.
Limits SIM usage based on the total number of calls made.
Limits SIM usage based on consecutive failed call attempts.
Limits SIM usage based on consecutive calls without alerts.
Limits SIM usage based on consecutive no-answer calls.
Limits SIM usage based on consecutive calls with no carrier signal.
General settings for SIM pool management, including SIM poll and registration.
Enables or disables SIM polling, disabling cards on the gateway.
Specifies whether to use local policies for automation with SIM pool.
Settings for connecting to a SIM center or directly to a SIM pool device.
Enables SIMs within the gateway to call each other.
Sets conditions for inter-calling, such as online time and call intervals.
General settings for inter-calling functionality.
Option to automatically retrieve local SIM numbers for inter-calling.
Enables callback function and sets callback numbers for each port.
Enables the call waiting feature for SIM cards on each port.
Controls SIM usage time with global and per-channel duration limitations.
Displays statistics on total, daily, and remaining call durations per SIM.
Enables auto recharge and specifies the server address and account.
Sets the minimum balance threshold to trigger auto-recharge.
Enables state notification and specifies the server address and account.
Selects and prioritizes voice codecs such as G729, G.723, iLBC, and AMR.
Adjusts voice volume, dial tone, ringback tone, and busy tone parameters.
Enables specific progress module logs and sets log file size.
Configures the number of log files and the size of dying messages.
Selects specific modules (WIRELESS, DSP, POTS, etc.) for logging.
Manages user accounts and device-specific settings like alias and time zone.
Displays and allows management of different account levels for web access.
Sets device alias, time zone, and schedules automatic reboots.
Configures remote management using ERM software.
Imports firmware or configuration files into the device.
Exports the current device configuration settings.
Resets the device to factory default settings, removing current configurations.
Saves current settings and reboots the device.
General| Category | Gateway |
|---|---|
| Model | SK GoIP |
| Protocols | SIP |
| Network Protocols | TCP/IP, UDP, RTP, HTTP, DHCP, DNS |
| GSM Frequency | GSM 850/900/1800/1900MHz |
| VoIP Standards | SIP RFC3261 |
| LAN | 10/100 Mbps Ethernet |
| Power Supply | DC 12V/2A |
| Operating Temperature | 0°C to 40°C |
To Next Page