Need help?Do you have a question about the SkyLink PL-318 and is the answer not in the manual?
Connect the Plug-in Dimmer to an outlet and plug in the light fixture.
Set transmitters for standard on/off and dimming control.
Configure transmitters to trigger flashing light alerts.
Set transmitters for timed on/off operation for energy saving.
Toggle the connected light on or off using programmed transmitters.
Adjust light brightness for compatible incandescent or CFL bulbs.
Configure transmitters to control Skylink Security System functions.
Use transmitters for Arm Away, Disarm, and Panic signals.
General| Type | LED Bulb |
|---|---|
| Beam Angle | 120° |
| Frequency | 50/60 Hz |
| Dimensions | 60 x 110 mm |
| Color | White |
| Input Voltage | 220-240V |
| Lifespan | 25000 hours |
| Material | Plastic |
To Next Page