SkyLink PT-434 - User Manual

Skylink will not -be held
liable or responsible for
any misuse or application
of this product other than
for its intended use.
8
PANtC TRANSMITTER
USER’S INSTRUCTIONS
(Model PT-434)
The Panic Transmitter con-
veniently fits on any key-
chain or necklace. it allows
you to activate Skylink’s
receivers (Secuftiy Control
Panel SGOO1, SC-002,
Emerge&y Dialer AD+,
Audio Alarm AA-433, Silent
Alarm SW-433) from a
maximum distance of
approximately 100 feet
from the receiver. This
transmitter is water
resistant and shock resis-
tant, it allows you to cany
this transmitter all the time.

Summary

Product Introduction

Program Transmitter to Security Control Panel

Battery Management

Replace Panic Transmitter Batteries

Instructions for safely replacing the transmitter's 3-volt lithium batteries, noting battery life and orientation.

Program Transmitter to Emergency Dialer

Panic Transmitter Operation

FCC Compliance Information

SkyLink PT-434 Specifications

General

Channels	1
Modulation	ASK
Battery	12V DC
Operating Range	Up to 100 meters (open space)
Operating Voltage	12V