skymee Owl Robot - Frequently Asked Questions (Part 2); TF card problems and firmware

Q&A
③
WhenyoustopusingOwlRobot,itwillautomaticallygotosleepafter5minutes.
Insleepmode,theowlcanwakeupremotely.
ItcanbeawakenedbytouchorAPP(openowlrobotvideo).
Ifyouopentheapp,thereal-timevideoshowsthattheconnectionfails,itmaybeanetworkproblem,
pleaseconnectasmoothernetwork.
Forbetteruse,itisrecommendedthatyouupdatethefirmware.
1.OpenDeviceSettings-FirmwareUpdate-Clickthefirmwareserialnumbertoupdate.
Becarefultopreventitfromgoingtosleepduringtheupdateprocess.
2.AftertheupdateiscompleteyouneedtoresetandconnecttoWiFiagain.
3.Enterthefirmwareversiontoseeiftheowlrobothasupgradedthefirmware.
Ifyouhaveanyquestions,pleasebefreetocontactus.
Owlfallasleep
TFcardproblems
OwlRobotonlysupporttomemoryfunctionTFcardclass10orabove(minimum16GB,maximum64GB).
Otherwise,forbetteruse,pleaseupgradeyourfeederversion.Clickonthetoprightcorneroftheappvideo
interface,turntothesettingpageandyouwillfindFirmwareversion.Ifyourversionisnotthelatest,
pleaseclickthefirmwareversiontoupgrade.Resetandre-connecttothedeviceafterupgrading.