Need help?Do you have a question about the Skyrc i-meter and is the answer not in the manual?
Power| max input voltage | 60 V |
|---|---|
| voltage measurement range | 2-8S LiPo/LiFe/LiIon |
| max current | 100 A |
Performance| voltage display resolution | 0.001 V |
|---|---|
| shunt resistance | 0.001 ohm |
| temperature resolution | 1 Celsius / 1 Fahrenheit |
Dimensions and Weight| dimensions | 95.3x72.8x21.5 mm |
|---|---|
| net weight | 85 g |
| volt port | 2.54 mm pitch pins, 9 pins |
Lists all items included in the SKYRC i-Meter package, such as cables and probes.
Illustrates how to correctly connect the battery balance lead to the i-Meter for voltage checking.
Explains reading serial voltage, remaining charge, and cell balance on the i-Meter display.
Shows the correct wiring setup for measuring individual cell internal resistance.
Details factors like contact corrosion, cell temperature, charge, and age influencing resistance measurements.
Lists essential safety warnings and usage guidelines for operating the Watt Meter function.
Demonstrates connections and readings for testing loads, battery charging, and battery discharging.
Explains testing servos and ESCs without transmitter or receiver using the i-Meter.
Details the optical tachometer sensor, placement, and how it measures propeller RPM.
Explains connecting the temperature probe and monitoring component temperatures.
Provides a table of 'CF' values for different propeller manufacturers used in thrust calculations.
Details the product's one-year warranty coverage and service terms.
To Next Page