3
Connecting to the Internet
Wi-Fi - Go to Settings -> Network -> Wi-Fi -> Wi-Fi should be turned
on by default, Wait a few moments for the device to find your Wi-Fi
network. If the Wi-Fi is turned off click on Wi-Fi to turn it on. Click on
YOUR network and enter YOUR password (Wi-Fi passwords are case
sensitive!).
LAN/Ethernet - Connect your own LAN/Ethernet cable (Not
included) to the box from your router, go to Settings -> Network ->
Scroll down to Ethernet and make sure it is connected.
Setting Date and Time (Very Important)
Setting the correct date and time – IMPORTANT DO NOT SKIP THIS
STEP!
Go to Settings -> Date & Time -> Click on Automatic Date and Time -
> Click on Use Network Provided Time. Use the Back button on the
remote to exit to the Home screen.
To Next Page
Loading...