Need help?Do you have a question about the Skytec ODS40B and is the answer not in the manual?
General| Tweeter | Yes |
|---|---|
| Speaker type | 2-way |
| Speaker position | Front |
| Number of drivers | - |
| Speaker placement | In-wall/in-ceiling |
| Audio output channels | 2.0 channels |
| Tweeter diameter (imperial) | 4 \ |
| Impedance | 8 Ω |
| Sensitivity | 89 dB |
| Frequency range | 70 - 20000 Hz |
| RMS rated power | 75 W |
| Product color | Black |
| Housing material | Acrylonitrile butadiene styrene (ABS) |
| Recommended usage | Universal |
| Connectivity technology | Wired |
| Power source type | AC |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 210 mm |
|---|---|
| Width | 160 mm |
| Height | 150 mm |
| Weight | 2350 g |
Warns about high sound pressure levels causing permanent hearing damage and advises limiting exposure.
Ensures amplifier is off during connection and warns against using low-quality or overloaded amplifiers.
Covers safe mounting, stable placement, stacking limits, and protection from humidity.
Instructs not to use damaged units and advises against self-repair, recommending qualified technicians.
Recommends setting amplifier to lowest volume before switching on and keeping units away from children.
Advises against fire hazards, limits use to indoor conditions, and promotes recycling.
Guidance on checking amplifier suitability, switching off, polarity, and using quality speaker cables.
Explains impedance changes when connecting multiple speakers in parallel and amplifier compatibility.
To Next Page
