3 - 12
Congratulations on the purchase of this SkyTec active speaker set.
Please read this manual carefully prior to using the unit.
WARNING
TO ENSURE MANY YEARS OF TROUBLEFREE USE, PLEASE OBSERVE THE FOLLOWING
Hearing damage: Loudspeakers are easily
capable of generating high sound pressure
levels (SPL) sufficient to cause permanent
hearing damage to performers, production crew
and audience members. Caution should be
taken to avoid prolonged exposure to SPL in
excess of 90 dB.
Do not overload the box to avoid damage to the
speakers.
Do not place an open fire (candle, etc.) on top or
next to the box - FIRE HAZARD
Only connect to an earthed mains outlet of
230Vac/50Hz.
For indoor use only. If the box is used outdoors,
you need to make sure that no humidity can
enter the box.
When not in use, unplug the unit from the mains.
Unplug the unit from the mains prior to checking
or replacing the fuse.
Make sure that the box is placed on a stable,
strong surface.
The boxes can be stacked but do not put more
than 60kg weight on the box.
The boxes can be hung. Use only strong and
approved mounting material. During the
mounting, make sure that nobody is standing
below the mounting area.
Place the stand always on a flat, level, and
stable surface and that the legs do not present a
trip hazard.
Use only stands which are designed to support
the weight of the speaker. Do not attempt to
place more than one speaker on a stand
designed for a single speaker.
Route cables so that peoples will not trip over
them pulling the speaker over.
Do not place liquids on the box and protect it
against humidity. Humidity can shorten the life
time considerably.
Only use suitable means of transportation if
you want to move the box – BEWARE OF
YOUR BACK !!
If the unit is damaged to an extent that you can
see internal parts, do not plug the unit in a
mains outlet. In this case, please contact
Tronios.
Always unplug the unit during a thunderstorm
or when it is not in use.
If the unit has not been used for a longer
period of time, condensation can occur inside
the housing. Please let the unit reach room
temperature prior to use.
Never try to repair the unit yourself. It does not
contain any user serviceable parts.
Run the mains lead in such a way that nobody
can fall over it and nothing can be put on it.
Only use the supplied mains lead or another
lead recommended by SkyTec.
Set the unit to the lowest volume prior to
switching it on
Keep the unit out of the reach of children.
Protect your environment. Recycle packing
material whenever possible.
Do not throw a faulty unit into normal
household waste but bring it to a special
collection point. A large part of it can be
recycled.
PRODUCT FEATURES
General
- 1x 12" Amplified speaker
- 1x 12" Passive speaker
- Set of speaker stands 1.8m height
- 5m Speaker cable (jack-jack)
- Tone control
- Line and microphone input
- Plug and Play unit
- Supplied as a set in one carton
About the enclosure
The enclosure and baffle of this range of speakers are made of polypropylene co-polymer. The use of co-
polymer allows features such as stand mounting sockets, handholds, ports and high frequency horns to be
molded directly into the cabinet. Not only do you get contemporary appearance, you also get lots of
functionality.
To Next Page
Loading...
Need help?
General
