To Next PageTo Next Page
Need help?Do you have a question about the Skytrac ISAT-200 Series and is the answer not in the manual?
General| Communication | Iridium satellite |
|---|---|
| Data Interface | RS-232, RS-485 |
| Operating Temperature | -40°C to +70°C |
| Satellite Network | Iridium |
| Display Type | LCD |
| Screen Size | 5.0 inch |
| Resolution | 800 x 480 pixels |
| Brightness | 400 cd/m² (nit) |
| Certification | DO-160G |
Details electrical power needs.
Lists digital and analog input/output specifications.
Details environmental testing and certifications.
Summarizes RTCA/DO-160 environmental test results.
Outlines compliance with emission standards.
Lists the primary steps for system installation.
Specific instructions for antenna mounting.
Steps to connect the battery.
Illustrates ARINC 404 connector pinouts.
Details RS-485 serial communication ports.
Details RS-232 serial communication ports.
Audio settings for the installer.
Steps for verifying system functionality.
Procedures for electromagnetic interference testing.
Specifies FAA policy for antenna placement.
Details operational restrictions and battery limits.
Outlines periodic inspection requirements.
Step-by-step guide for battery replacement.
Procedures for replacing the SIM card.
Provides safety guidelines for batteries.
