Skytron SS2205-J2 User Manual

OWNER'S MANUAL
WARMING
CABINETS
MODELS SS2201-J2
THROUGH SS2207-J2
TEC-F-0007 REV8
9/13

Skytron SS2205-J2 Specifications

General

Light Source	LED
Lux	160, 000 Lux
Frequency	50/60Hz
Description	Surgical Light
Type	Surgical headlight
Voltage	100-240V
Certification	CE, ISO

Summary

Product Safety and Operation

Safety Labels and Operating Instructions

Technical Specifications

User Safety and Attention Notes

Critical Warnings and Precautions

Essential warnings and notes highlighting hazards, patient safety, and operating precautions.

Section I: Introduction

Unit Overview, Controls, and Features

Installation and Operation Principles

Section II: Operation

Control Panel, Initial Setup, and Alarms

Operating Procedures

Temperature Setting and Loading Guidelines

Instructions for setting temperature, loading blankets/solutions, and rotation.

Cabinet Operation and Shelf Management

Unloading, Shutdown, and Shelf Adjustment

Section III: Maintenance and Repair

Troubleshooting and Preventative Maintenance

Guide for troubleshooting common issues and performing preventative maintenance tasks.

Preventative Maintenance Details

Cleaning and Calibration Procedures

Detailed steps for routine cleaning (6 months) and temperature controller calibration (yearly).

Component Maintenance: Thermostat and Fan

Limit Thermostat Reset and Fan Replacement

Component Maintenance: Heating Element and Probe

Heating Element and Probe Replacement

Component Maintenance: Temperature Controller

Controller Replacement and Programming

Guide for replacing the temperature controller and configuring its operational parameters.

Section IV: Replacement Parts