SkyVac MIGHTY ATOM - SUCK AND BLOW FUNCTION; SUCTION AND BLOW PORT OPERATION

4
SUCTION:
1. Insert / push the Hard Cu on the end of the 50mm Wire
Reinforced Hose, into the cyclonic sucon port. “Click”
lock in place.
2. To turn on the sucon funcon, press the “ON” buon.
3. To remove the Hard Cu from the port, press down on
the red buon on the side of the cyclonic port to unlock.
Once unlocked, pull the hard cu out of the Vac port. in
place
BLOW:
1. Insert / push the Hard Cu on the wire reinforced hose, into the blow port and
“Click” lock in place.
2. To turn on the blow funcon, press the “ON” buon.
3. To remove the Hard Cu from the blow port, gently slide the red buon over to the
le (away from the vac pot). Once unlocked, pull the hard cu out of the blow port.
SUCTION
BLOW
BLOW PORT:
Push Red buon to
the le to release
cu.
SUCTION PORT:
Push Red buon
down to release
cu.