Need help?Do you have a question about the skywalker sports SSBAC40 and is the answer not in the manual?
Register the product for warranty information.
Secure Eyebolt (10) to top frame corner tube (2) with washer (11) and nut (12).
Attach two top frame corner tubes (2) to one top frame middle tube (1).
Connect two upper upright tubes (3) to top frame corner tube assembly.
Connect two lower upright tubes (4) to upper upright tubes (3).
Secure batting cage feet (9) to lower upright tubes (4).
Connect upper upright middle tubes (5) to frame corner tube section.
Connect two lower upright tubes (4) to upper upright middle tubes (5).
Secure batting cage feet (9) to lower upright tubes of section 2.
Insert side connection tube end (6) into side connection joint (8).
Insert side connection tube middle (7) into side connection tube end (6).
Insert another side connection tube end (6) into the middle tube (7).
Add another side connection joint (8) to complete an attachment section.
Insert joints (8) of attachment sections into section 1 and section 2 frames.
Connect another section 2 frame using attachment sections.
Connect the remaining section 1 frame to the last section 2 frame.
Attach the batting cage net (17) using metal net clips (18) to the eyebolts (10).
Thread elastic rope (19) through net and attach to middle tube.
Repeat steps 17-18 for remaining sections.
Insert ground stakes (14) through feet to secure the frame.
Confirm assembly completion and provide product feedback.
Inspect product regularly, replace worn parts, and contact service for claims.
General| Category | Sports & Outdoors |
|---|---|
| Brand | Skywalker Sports |
| Model | SSBAC40 |
| Backboard Material | Polycarbonate |
| Adjustable Height Range | 7.5 to 10 feet |
| Pole Material | Steel |
| Net Included | Yes |
| Assembly Required | Yes |
| Backboard Size | 40 inches |
| Wheel System | Yes |
To Next Page