8
STEP 3
Now all you need to do is connect the frame pieces together! (See, this isn’t too bad... is it?)
Remember, the ends with the larger diameter should face the ground!
STEP 4
Insert one leg (3) into the larger diameter end of the frame tube (1), and
tighten using one self-tapping screw (10).
Repeat this step until you have all 6 legs assembled!
Leg (x6)
3
Self-tapping
Screw (x6)
10
ASSEMBLY
Big diameter end
(10)
(10)
(10)
(10)
(3)
Big diameter
(1)
To Next Page
Loading...
