14
14
14
14
15
15
15
15
17
17
17
17
16
16
16
5
5
10
8. First find Middel Upright 2(10) with marked 10.
Attach four Plastic Protectors (14) with four M6
X40mm Button Bolts (16), four M6 Washers
(17) and four four M6 Locknuts (15).
Do not tighten the locknuts.
8
9. First find the Side Upright 2 (3)with marked 3.
Attach two Plastic Protectos(14) to two Long
Cross Bars (5) with two M6X40mm Button
Bolts (16), two M6 Washers (17) and two M6
Locknuts (15).
Then fix the Side Upright 2 (3) with two M8 Arc
Washers (18) and two M8X35mm Button Bolts
(19).
Finally press the Plastic Cap (13) into Side
Upright 2 (3).
Do not tighten the locknuts.
13
16
17
14
15
5
18
19
16
17
14
15
5
18
19
3
9
13
To Next Page
Loading...