Skywatch Xplorer 4 - User Manual

Need help?

Do you have a question about the Skywatch Xplorer 4 and is the answer not in the manual?

Summary

Technical Specifications

Brief Instructions

General Operation

Explains the one-button operation and auto-shutoff feature of the device.

Wind Speed Measurement

Details how the Xplorer measures wind speed and changes units.

Temperature Measurement

Describes temperature measurement and unit conversion for C/F.

Feature Explanations

Wind Direction and Compass

Covers compass measurement, calibration, and how to interpret readings.

Altitude and Air Pressure

Explains how altitude is measured based on air pressure and initial calibration.

Device Operation Basics

Switching On the Device

Instructions on how to turn the Xplorer on using its single button.

Switching Off the Device

Battery and Backlight

Battery Replacement

Step-by-step guide on how to replace the battery and battery life.

Modes and Mode Changing

Wind Speed Modes

Instant Wind Speed with Maximum

Wind Speed and Temperature Modes

Instant Wind Speed with Ambient Temperature

Wind Speed and Wind Chill Modes

Current Wind Speed with Wind Chill Temperature

Wind Speed and Compass Modes

Instant Wind Speed with Electronic Compass

Wind Speed and Altitude Modes

Current Wind Speed with Altitude

Wind Speed and Altitude Modes (Continued)

Display of Maximum Altitude

Calibration of the Altitude

Wind Speed and Pressure Modes

Current Wind Speed with Barometric Air Pressure

Pressure Modes Details

Display of Absolute Pressure (QFE)

Calibration of Relative Pressure (QNH)

Historical Data and Trends

History Management and Reset

General Reset

Skywatch Xplorer 4 Specifications

General

Power Supply	CR2032 battery
Wind direction	0° to 360°
Humidity	0% to 100%
Barometric pressure	300 hPa to 1100 hPa
Display	LCD
Type	Handheld anemometer