SkyWind Energy NG User Manual

SkyWind NG
Micro Wind Turbine
Owners Manual SkyWind NG
Version 5.7 - 01/01/2024
This document represents the interpretaon of the original document „Bedienungsanleitung,
Version 5.7“ which may be found online at hp://myskywind.com/ and was made to the best
knowledge of the interpreter. Only the original document is legally binding.
Please always check for the latest document online at www.myskywind.com. Manual is
subject to change without noce. Only the latest version is binding.
Translaon of the original manual
FOR INSTALLATION BY TRAINED PROFESSIONALS ONLY
hps://www.myskywind.com/infothek

SkyWind Energy NG Specifications

General

Brand	SkyWind Energy
Model	NG
Category	Wind Turbines
Language	English

Summary

1. Annotations

2.1 Introduction

2.2 Trained Professionals

3. Delivery Contents

4. Target Audience & User Advice

4.1 Target Audience

Identifies who the manual is for and who can operate the turbine.

Disposal

Information on the disposal of electrical and electronic equipment.

Wear & Service Life

Discusses wear, service life, and required periodic inspections.

4.3 Appropriate Use

Wind turbine

Lists the components that constitute the wind turbine system.

Wind turbine grid inverter

Defines the intended use and inappropriate uses of the grid inverter.

12/24 V DC charge controller

Defines the intended use and inappropriate uses of the DC charge controller.

Two blade all-metal rotor blade

Specifies the intended use and handling of the rotor blades.

Storm control system / Sound control system

Instructions for installing and setting up the storm and sound control systems.

Island Protection / VDE 4105

Requirements for grid-parallel installation and compliance with standards.

4.4 Important: Log book

5. Safety

5.1 Mechanical Dangers

Details dangers associated with rotating parts and the nacelle weight.

5.2 Electrical Dangers

Highlights risks of electrical current and proper cable usage.

5.3 Safety During Installation

5.4 Installation Guide

5.5 Operating Instructions

6. Technical Data

6.1 Specification SkyWind NG

Lists technical specifications for the SkyWind NG wind turbine.

6.2 Specification Grid Inverter

6.3 Specification Charge Controller

6.4 Advice to your wind generator

7. Installing The SkyWind NG

7.1 Installation Schedule

Provides a step-by-step schedule for the installation process.

7.2 Fitting the cables to the generator

7.3 Preparations for Installation

7.4 Mounting the rotor blades

7.5 Mounting the nacelle

8. Installation Sites For SkyWind NG

8.1 Installation Site

Guidelines for selecting an optimal installation site for wind flow.

8.2 Turbulence

8.3 Annual Yield

9. Tower

9.1 Requirements for towers

Specifies the requirements for suitable towers and installation practices.

9.2 Decoupling your tower for mount on buildings/structures

9.3 Operation on buildings and homes

9.4 Structural stability

10. Wiring / Eletrical Connection

10.1 Wiring

Provides essential guidelines and safety precautions for wiring the turbine.

10.2 Grid inverter

10.3 Setting up the inverter

10.4 Correction for height above mean sea level / air density

10.5 Template and documentation obligation

10.6 AC wiring

10.7 Wire Cross-Section

10.8 Operating states of SkyWind NG

11. Wiring Diagram / Storm Control

11.1 Grid or AC connected installation

Wiring diagram and instructions for AC connected installations.

11.2 Battery charger or DC installation

11.3 Setting up the storm control

12. Optional Noise Control

14. Initial Start-Up

14.1 Electrical inspection and mechanical test

Step-by-step guide for electrical and mechanical testing after installation.

14.2 Fine adjustment / noise-reduced operation

14.3 Documentation

15. Final Notes