EasyManua.ls Logo

Slackers Ninja Net - NINJALINE Maintenance; Seasonal and Regular Maintenance; Surfacing Material Requirements

Slackers Ninja Net
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
9. MAINTENANCE OF YOUR NINJALINE™
At the beginning of each play season:
• Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked or
missing.
• Check all metal parts for rust. If found, sand and repaint using a non-lead based paint meeting the
requirements of 16CFR 1303. Lubricate all metallic moving parts per manufacturers instructions
• Check all moving parts including disks, ropes, cables, and chains for wear, rust, or other deterioration.
Replace
as needed.
• Check the rope and disks for deterioration, cracking or fraying. If found, DO NOT USE and dispose of
immediately.
Twice a month during play season:
• Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked or
missing.
Once a month during play season:
• Check all moving parts including disks, ropes, cables, and chains for wear, rust, or other deterioration.
Replace
as needed.
At the end of each play season or when the temperature drops below 32 Degrees Fahrenheit take in
your Cargo Net and store indoors in cool dry location.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain
appropriate depth. Replace as necessary.
At the end of each play season or when the temperature drops below 32° F: Inspect all parts for
wear/damage. Replace before next season of use.
• Take down your entire NINJALINE setup and clean with a mild soap and water solution. Let dry and
then store indoors.
• X.3.1.1 Loose-Fill Materials: Maintain a minimum depth of 9 inches of loose-fill materials such as wood
mulch/chips, engineered wood fiber (EWF), or shredded/recycled rubber mulch for equipment up to 8 feet
high; and 9- inches of sand or pea gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12
inches will compress to about a 9- inch depth of surfacing over time. The surfacing will also compact,
displace, and settle, and should be periodically refilled to maintain a least a 9- inch depth.
PLEASE DO NOT RETURN YOUR RIPLINE PRODUCT TO THE STORE!
WE ARE HERE TO HELP YOU!
IF YOU HAVE ANY QUESTIONS ABOUT YOUR ZIPLINE
PLEASE CONTACT US:
1-844-834-4334 • INFO@RIP-LINE.COM
b4Adventure 4010 Holly Street Unit 16 • Denver Colorado 80216 • 1-844-834-4334 QUESTIONS?
info@b4adventure.com · www.b4adventure.com - DC:080818

Related product manuals