During the working process, when the dog barks continuous-
ly, the stop-barking strength will be gradually strengthened, a
total of 5 times a cycle. In the 5th level of stop barking inten-
sity, the barking is not stopped within 30 seconds, and the
stop barking intensity will be kept at the 5th level.
There are 3 kinds of stop barking modes, including beep,
vibration, beep + vibration.
9
10
When used in a multi-dog environment, please adjust the sensitivity to
levels 1-5 to reduce the noise of barking nearby dogs.
Note: The device adopts the waveform recognition technology of
intelligent dog barking sound. The ambient noise may be very close to
the barking frequency of the dog, such as the noise in the outdoor
environment. If it is easy to be triggered when there is TV or music
playing around, please reduce the sensitivity level appropriately.
Sensitivity
Level
1 2 3 4 5 6 7 8
Dog bark
Recognition
Vibration
Detection
Setting
reference
Large≥50 lbs
Medium
20-50 lbs
Small 8-20 lbs
Barking
sound volume
When the display is on, short
press the button to adjust
the sensitivity
With the display lit, short press
the button to adjust the
sensitivity level.
Our Bark collar has 8-level sensitivity. The sensitivity on a bark collar refers
to the level at which the collar detects and responds to a dog's barking. It
determines how easily the collar will activate and deliver a corrective
stimulus, such as a vibration, sound, or mild electric stimulation, when it
detects barking. Higher sensitivity settings mean the collar will be triggered
by even softer or quieter barks, while lower sensitivity settings require
stronger or more persistent barking to activate the collar. The sensitivity
level can usually be adjusted based on the individual dog's needs and
behavior
NOTE: It is generally advisable to avoid using level 8 unless levels 1-7 have
no effect on the dog. The device incorporates a built-in motion sensor. At
the 1-7 level, the device will only be activated when it detects both dog
barking and vibration of vocal cords, minimizing false triggers. At level 8,
it can be activated when it detects a dog barking
Please refer to the table below for the sensitivity settings of the device:
To Next Page
Loading...