This document describes the Sleep.8 Smart Jet S Multi-function Massage Chair, providing details on its functions, technical specifications, usage, and maintenance.
The Sleep.8 Smart Jet S is a multi-function massage chair designed for household use, offering various massage programs and features.
Functions:
The chair's external structure includes a speaker, pillow, back cushion, back cover, armrest, seat cushion, legrest, controller port, and casters for mobility. Internally, it features a massage mechanism, air pressure massage units for the shoulder, arms, and calf, a back heating pad, and roller massage units for the sole.
The power box, located at the rear of the chair, includes a power ON/OFF switch, a safety fuse, and a power supply socket. Users are cautioned against allowing children to play near the power supply box, using the chair during thunderstorms, or leaving it plugged in when not in use for extended periods.
The chair is controlled via a remote with a display screen. The remote features buttons for ON/OFF, Menu, Up/Down/Left/Right navigation, OK, Back Up/Down, Feet Up/Down, Heat, and Zero Gravity.
- ON/OFF: Powers the chair on or off. The default working time is 20 minutes.
- Menu: Accesses auto mode, manual mode, air pressure massage, heat, roller massage, and settings.
- Shoulder Position Adjustment: In manual and point mode, adjusts the position of point massage.
- Auto Program Button: Provides access to 9 automatic programs: Recovery, Extend, Relax, Refresh, Upper Auto, Lower Auto, Boss Nursing, Queen Slimming, and Soul Spa.
- Recovery: For relieving fatigue and restoring vigor after a day's work.
- Extend: For office workers and drivers, to stretch the full body and recover.
- Relax: For leisure massage in the morning or noon to generate muscle energy.
- Refresh: For relieving neck, back, and waist pain with a semi-auto focusing massage.
- Upper/Lower Auto: For massaging different parts of the body.
- Boss Nursing: Higher intensity massage focusing on shoulders and neck, designed for office staff to relieve muscle pain.
- Queen Slimming: Gentler intensity massage focusing on the waist and back, designed for women to maintain slimness and promote metabolism.
- Soul Spa: Suitable for short leisure massage in the morning or noon to invigorate muscles.
- Manual Program Button: Accesses manual massage programs including Kneading, Tapping, Knocking, Shiatsu, Sync, and Rhythm.
- Mode: Selects massage techniques (kneading, knocking, sync, tapping, shiatsu, rhythm).
- Part: Selects massage areas (whole body, partial, or specific points).
- Width: Adjusts massage width (wide, medium, narrow).
- Speed: Adjusts massage speed (1-6 levels).
- Direction Button (OK): Navigates menus and confirms selections.
- Heat: Activates/deactivates the heating function.
- Zero Gravity: Activates/deactivates the zero gravity recline. If the backrest and legrest are manually adjusted, zero gravity will be deactivated.
- Feet Up/Down: Moves the legrest to its highest or lowest position.
- Back Up/Down: Moves the backrest to its original or lowest position.
The display screen menu provides visual feedback for all selections and adjustments. In auto or manual mode, the device returns to the home page after 10 seconds of inactivity. Air pressure intensity and massage wheel speed can be adjusted from the home page.
Technical Specifications:
- Input Voltage: 220-240V
- Power: 160W
- Rated Frequency: 50/60Hz
Usage Features:
- Installation: Involves unpacking, checking components, connecting the remote controller plug to its socket, and plugging the power cord into a grounded outlet.
- Commissioning: Before use, ensure sufficient space around the chair. Recline the backrest and extend the legrest to their limits, then test all functions. Power off and return the chair to its original position.
- Before Sitting: Ensure the legrest is correctly installed and the chair is in its original position. If not, power cycle the chair. Caution: Do not sit on the chair if the legrest is raised or subject the legrest to heavy loading.
- Moving the Chair: The chair has moving rollers. Raise the backrest to its highest point, switch off and unplug the chair. Lift the front part by holding the moving holder while another person pushes the top of the chair, then move it using the rollers. Caution: Do not move the chair with someone sitting on it or by holding the armrests.
- Turning on Power: Plug the power cord into a three-core grounded socket and turn on the power switch at the bottom of the massage chair. Caution: Ensure the power wire is undamaged and exposed wires are covered. The power switch should be off when connecting to electricity.
- Installation Position: Ensure a minimum of 15cm clearance from the wall or other obstacles at the back, and 20cm from any obstacles at the front.
- Floor Protection: Place a carpet or soft pad under the chair to prevent floor damage.
- Surrounding Environment: Keep the chair away from damp places (e.g., bathroom) to avoid electrical leakage and away from high-temperature sources (e.g., stove) to prevent fire or leather damage.
- Grounding: The product must be grounded to reduce the risk of electric shock. It is equipped with a grounding conductor and plug, which must be inserted into a properly installed and grounded outlet. Do not modify the plug.
Maintenance Features:
- Cleaning:
- Wipe the back cover, armrests, legrests, air tubes, and plastic components with a cotton cloth dampened with neutral detergent, then wipe again with a dry cloth.
- Wipe the controller, DVD, and power supply box with a dry cloth.
- Wipe the back cushion and pillow with a cloth dampened with neutral detergent, then with a wet cloth, and allow them to air dry in a well-ventilated area.
- Cautions for Maintenance:
- Always unplug the power cord before maintenance. Do not handle the plug with damp hands.
- Be careful not to let detergent enter the power supply box when cleaning the back cover.
- Do not iron the upholstery.
- Storage: After use, wipe off dust and dirt. If storing for a long time, cover the product with a dust cover (self-provided).
- Storage Cautions: Do not store the product in direct sunlight or high-temperature areas, as this may cause upholstery fading.
- Troubleshooting: If any unusual symptoms occur (burnt smell, intermittent power, hot power cord, other abnormal behavior), stop using the chair immediately and contact a local distributor for repair.
- General Cautions: Do not disassemble, maintain, or remodel the massage chair yourself. Do not spill water or other liquids on the controller. Do not place heavy objects on the controller or power cable.
APP Download and Installation (Bluetooth Connection Method):
- Apple iOS (e.g., iPad):
- Open the App Store, search for "5860" or "massage chair," and download the application. Enable Bluetooth on your Apple device (Bluetooth 4.0 compatible) and connect to the chair's Bluetooth.
- Open the "massage chair" app. For the first connection, enter your Apple ID username and code. After successful registration, click on "Bluetooth" in the settings to connect.
- Bluetooth Audio: The chair has Bluetooth for audio devices. Open Bluetooth on your audio device, pair with RT5860 to play music. An additional audio input cable for other audio devices is available next to the controller socket (optional).
Need help?
To Next Page
General