CUSTOMER SERVICE 1-800-723-0316 FROM 8:00AM TO 5:00PM PST MONDAY-FRIDAYCUSTOMER SERVICE 1-800-723-0316 FROM 8:00AM TO 5:00PM PST MONDAY-FRIDAY
PAGE 6 PAGE 7
SETUP GUIDE
OPEN AND UNPACK
Lay the box flat, open the box and unpack the list of components.
No tools are required for assembly.
COMPONENTS
(1) Remote
(3) AAA Batteries
(6) Adjustable Legs
(1) Power Cord
(1) AC/DC Power Adapter
(1) Power Cord
(1) Emergency Battery Strip
(3) Mattress & Side Retainer Bars
TWIN XL/CKS SIZES ONLY
(1) Synchronization Cord
(1) Connecting Straps
(4) Velcro Securing Straps
Synchronization Cable
Mattress & Side
Retainer Bars
Connecting StrapVelcro Securing
Straps
SETUP GUIDE
1
POWER CORD ASSEMBLY
Locate the control box built into the underside of the adjustable base. Connect
the control box power cord, the AC/DC Power Adapter, and the Power Cord.
Store the Emergency Battery Strip in a safe location in case of a power outage;
two 9-Volt batteries are required for operation and are not included.
2
ZERO CLEARANCE
Designed to sit on top of a flat surface or compatible
bedframe, without the use of legs. Legs are not required.
SEE ZERO CLEARANCE SAFETY INFORMATION PAGE.
LEGS
Select the desired leg height. Screw the legs into all 6 designated leg holes.
SEE THE CONNECTING STRAPS PAGE
SETUP GUIDE
3
or
PLACEMENT
Return the adjustable base to an upright and secure location, then plug in
the power cord to an outlet.
MATTRESS HEIGHT REQUIREMENTS: 8” MINIMUM AND 14” MAXIMUM.
INSTALL THE MATTRESS RETAINER BAR AND SIDE BARS.
ADD 3 AAA BATTERIES (INCLUDED) TO THE REMOTE.
The remote control is pre-programmed to work with the adjustable base. If you
have more than one adjustable base, each remote control and adjustable base
set will work separately.
5
4
6
SETUP GUIDE
ZERO CLEARANCE 1 SEGMENT 2 SEGMENT 3 SEGMENTS 4 SEGMENTS
3” Overall Height 6” Overall Height 9” Overall Height 12” Overall Height 15” Overall Height
ADJUSTABLE BASE HEIGHT OPTIONS
SETUP
SETUP
Master Control Box
Built into the underside of the
adjustable base
AC/DC Power Adapter
Power Cord
Input voltage 100-240V
To Next Page
Loading...