EasyManua.ls Logo

Sleep Science SBKDCT2 - Troubleshooting Power Outages; Emergency Battery Strip Use

Sleep Science SBKDCT2
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CUSTOMER SERVICE 1-800-723-0316 FROM 8:00AM TO 5:00PM PST MONDAY-FRIDAYCUSTOMER SERVICE 1-800-723-0316 FROM 8:00AM TO 5:00PM PST MONDAY-FRIDAY
PAGE 14 PAGE 15
TROUBLESHOOTING
POWER OUTAGE – EMERGENCY BATTERY STRIP
In case of an electrical outage, the Emergency Battery Strip allows you to operate the
adjustable base without power to your home. Only use the Emergency Battery Strip to
lift or lower the adjustable base into your desired sleeping position.
* Disconnect the adjustable base(s) from the power outlet.
* Locate the Emergency Battery Strip and install two 9-volt batteries.
* Attach the Emergency Battery Strip to the power cord.
* After the electricty is restored, the Emergency Battery Strip must be removed
before plugging the adjustable base back into the power outlet.
WARNING: Using the Emergency Battery Strip while the adjustable base is plugged
into a power outlet may cause the electrical components to short out and damage the
Master Control Box.
TROUBLESHOOTING
REFERENCE GUIDE
REFERENCE GUIDE
Massage Motor
Foot Actuator
Massage Motor
Master Control Box
Massage Motor
Head Actuator
Massage Motor
Pillow TiltVelcro Securing
Straps Location
Velcro Securing
Straps Location
Velcro Securing
Straps Location
Velcro Securing
Straps Location
TROUBLESHOOTING
TROUBLESHOOTING
Emergency Battery Strip
Master Control Box
Mounted under the adjustable base